Pipe organ

Common instrument for catholics, but unpopular for groups of musicians.

Some information from Wikipedia:

The pipe organ is a musical instrument that produces sound by driving pressurized air (called wind) through pipes selected via a keyboard. Because each organ pipe produces a single pitch, the pipes are provided in sets called ranks, each of which has a common timbre and volume throughout the keyboard compass. Most organs have multiple ranks of pipes of differing timbre, pitch and loudness that the player can employ singly or in combination through the use of controls called stops.

A pipe organ may have one or several keyboards (called manuals) played by the hands, and a pedalboard played by the feet, each of which has its own group of stops. The organ's continuous supply of wind allows it to sustain notes for as long as the corresponding keys are depressed, unlike the piano and harpsichord, the sounds of which begin to decay the longer the keys are held. The smallest portable pipe organs may have only one or two dozen pipes and one manual; the largest may have over 20,000 pipes and seven manuals.

The origins of the pipe organ can be traced back to the hydraulis in Ancient Greece in the 3rd century BC, in which the wind supply was created with water pressure. By the sixth or 7th century AD, bellows were used to supply organs with wind. Beginning in the 12th century, the organ began to evolve into a complex instrument capable of producing different timbres. By the 17th century, most of the sounds available on the modern classical organ had been developed. From that time, the pipe organ was the most complex man-made device, a distinction it retained until it was displaced by the telephone exchange in the late 19th century.

Pipe organs are installed in churches, synagogues, concert halls, and other public buildings and are used for the performance of classical music, sacred music, and secular music. In the early 20th century, pipe organs were installed in theatres to accompany films during the silent movie era, in municipal auditoria, where orchestral transcriptions were popular, and in the homes of the wealthy, equipped with player mechanisms. The beginning of the 21st century has seen a resurgence in installations in concert halls. The organ boasts a substantial repertoire, which spans over 400 years.

How it looks:




Example of playing:

Hurdy gurdy (wheel fiddle)

Hurdy gurdy is one of my favorites instruments. I wanted to describe it later, but i have only 26 minutes till next day and i promised to add 1 instrument every day.

Some information from Wikipedia:

The hurdy gurdy or hurdy-gurdy (also known as a wheel fiddle) is a stringed musical instrument that produces sound by a crank-turned rosined wheel rubbing against the strings. The wheel functions much like a violin bow, and single notes played on the instrument sound similar to a violin. Melodies are played on a keyboard that presses tangents (small wedges, usually made of wood) against one or more of the strings to change their pitch. Like most other acoustic string instruments, it has a sound board to make the vibration of the strings audible.

Most hurdy gurdies have multiple "drone strings," which provide a constant pitch accompaniment to the melody, resulting in a sound similar to that of bagpipes. For this reason, the hurdy gurdy is often used interchangeably with or along with bagpipes, particularly in French and contemporary Hungarian folk music.

Many folk music festivals in Europe feature music groups with hurdy gurdy player. Such as Omnia and Faun.
The hurdy gurdy is generally thought to have originated from fiddles in either Western Europe or the Middle East (e.g. rebab) some time prior to the eleventh century A.D. The first recorded reference to fiddles in Europe was in the 9th century by the Persian geographer Ibn Khurradadhbih (d. 911) describing the lira (lūrā) as a typical instrument within the Byzantine Empire.

How it looks:

Example of playing:

Gopichand

Maybe most original instrument from all Indian music. And it will be the last instrument in the Indian ethnic week.

Some information from here:

The gopichand, also, known as gopiyantra, is a very popular folk instrument of Bengal. It is an instrument that is much used by the wandering minstrels known as the Baul.

There are several variations on the construction. The length may be as small as one foot or as long as three feet, however 2-3 feet is the norm. It consists of a length of bamboo that is split through most of the length. The two ends are pried apart and attached to a resonator. This resonator may be a coconut, gourd, metal container or a hollowed out cylindrical section of wood. The open end of the resonator is covered with taught skin and a string penetrates the centre. This string is attached to a reinforced section in the centre. This string then passes through the hollow of the resonator and attaches to a tuning peg located in the bamboo.

The sound of the gopichand is most distinctive. There is a peculiar bending of the pitch as the two legs of the bamboo are squeezed together by the left hand while the right hand plucks the string. This is a rhythmic instrument rather than a melodic instrument and it is used to accompany instruments such as kartal, dotar, or khol.

How it looks:

Example of playing:

Esraj

Today's instrument should be a Taus, but i couldn't find information about it, so i will tell you about another bowed string instrument - Esraj.

Some information from Wikipedia:

The esraj is a string instrument found in two forms throughout the north, central, and east regions of India. It is a young instrument by Indian terms, being only about 200 years old. The dilruba is found in the north, where it is used in religious music and light classical songs in the urban areas. Its name is translated as "robber of the heart." The esraj is found in the east and central areas, particularly Bengal (Bangladesh and Indian states of West Bengal and Tripura) and it is used in a somewhat wider variety of musical styles than is the dilruba.

The Dilruba originates from the Taus and some argue is the work of the 10th Sikh Guru, Guru Gobind Singh, whilst that of the Taus was the work of Guru Hargobind (the sixth guru of the Sikhs). The Dilruba was then produced to replace the previously heavy instrument (the Taus). This attempt was intended to 'scale down' the Taus into what is now known to be the Dilruba. This made it more convenient for the Sikh army to carry the instrument on horseback.

The structure of both instruments is very similar, each having a medium sized sitar-like neck with 20 heavy metal frets. This neck holds on a long wooden rack of 12-15 sympathetic strings. While the dilruba has more sympathetic strings and a differently shaped body than the esraj, they both have four main strings which are bowed. All strings are metal. The soundboard is a stretched piece of goatskin similar to what is found on a sarangi. Sometimes the instrument has a gourd affixed to the top for balance or for tone enhancement.

The esraj is mostly used as an accompanying instrument. It is the accompanying instrument of choice for Rabindra Sangeet singing. However, it has also been used as a solo instrument to interpret Hindustani Classical Music, mostly in the Vishnupur tradition. Additionally, the esraj is a more modern invention from the Dilruba that was made and promoted by the Namdharis.

Both the dilruba and the esraj had been declining in popularity for many decades. By the 1980s the instrument was nearly extinct. However with the rising influence of the "Gurmat Sangeet" movement, these instruments are once again attracting considerable attention.

How it looks:

Example of playing:

Rudra veena

One more plucked sting instruments. Now it is just neck with two pots, which works as resonators.

Some information from Wikipedia:

The rudra veena is a large plucked string instrument used in Hindustani classical music. It is an ancient instrument rarely played today. The rudra veena declined in popularity in part due to the introduction of the surbahar in the early 19th century which allowed sitarists to more easily present the alap sections of slow dhrupad-style ragas.

The rudra veena has a long tubular body with a length ranging between 137 and 157 cm made of wood or bamboo. Two large-sized, round resonators, made of dried and hollowed gourds, are attached under the tube. Twenty-four brass-fitted raised wooden frets are fixed on the tube with the help of wax.

It is one of the three other major types of veena popular today. The others include vichitra veena and Saraswati veena. Out of these the rudra and vichitra veenas are used in the Hindustani classical music of North India, while Tanjour veena (also known as Saraswati veena) is used in the Carnatic music of South India. As Rudra is a name for the Hindu god Shiva, rudra vina literally means "the veena dear to Shiva."

Zia Mohiuddin Dagar was one of the 20th century's foremost exponents of the instrument. He modified and redesigned the rudra veena using bigger gourds, a thicker tube (Dandi), thicker steel playing strings (0.45-0.47 mm) and closed Javari that. This produced a soft and deep sound when plucked without the use of any plectrum (Mizrab).

How it looks:

Example of playing:

Pungi

When i played recorders other people often asked me "where is your snake?". They didn't know that Indian snake flute is Pungi. Here it is ^_^_^

Some information from Wikipedia:

The pungi, also called the been, or bin is a wind instrument played by snake charmers in India. The pungi is similar to the Chinese Hulusi but has only two reed pipes, known as the "jivala". The pungi was improved to produce the Shehnai. The pungi originated in India and is still played by snake charmers in street performances. The pungi is generally available in all music knowledge books and music instrument shops.

The pungi was originally developed as an Indian folk music instrument. It is important for religious purposes and music in India. The pungi was popular in the Badagutittū about fifty years ago. However, prior to this it derived from Indian folk music and was used for religious purposes for snake charming.

The pungi is traditionally made from a dried bottle gourd. Often, the neck of the gourd is carved for aesthetic reasons. On the other end, two reed or bamboo pipes are connected. These are known as the jivala. One of the pipes has seven holes and plays the melody; the other pipe is for drone. The jivala is fitted to the gourd with beeswax, which can be adjusted for pitch modification.

Indian musical practices often coincide with religious ideals. An example would be the comprehensive practice of mantra incantation, which, can be defined as meaningful and/or meaningless syllables used to create prayer to a supernatural force or deity. The pungi, or Indian snake charmer, is believed to be one of the many avenues in which one can communicate with the gods through devotional genres. The pungi is played with no pauses, so the pungi players use a technique called circular breathing.

How it looks:

Example of playing:

Sarangi

One more Indian instrument which i like. As i understood there aren't many really good and original instruments in India. I saw two types of flute, sitar and many instruments of sitar type, sarangi and many percussion instruments. But i still like Indian ethnic because of its slow meditative rhythms.

Some information from Wikipedia:

The Sarangi is a bowed, short-necked string instrument of India. It plays an important role in India's Hindustani classical music tradition. Of all Indian instruments, it is said to most resemble the sound of the human voice – able to imitate vocal ornaments such as gamakas (shakes) and meend (sliding movements). It is also said to be the hardest Indian instrument to master.

The word sarangi is derived from two Hindi words: sau (meaning "hundred") and rang (meaning "colour"). This is because the sound of the sarangi is said to be as expressive and evocative as a hundred colours. Its origins are unknown, however most people believe that it became a mainstream instrument in the mid 18th Century. Notoriously difficult to play and tune, the sarangi has traditionally been used primarily for accompanying singers (shadowing the vocalist's improvisations),in recent times it has become recognised as a solo instrument by the efforts of Ram Narayan and Sabri Khan.

Carved from a single block of wood, the sarangi has a box-like shape, usually around two feet long and around half a foot wide. The lower resonance chamber is made from a hollowed-out block of tun (red cedar) wood and covered with parchment and a decorated strip of leather at the waist which supports the elephant-shaped bridge. The bridge in turn supports the huge pressure of approximately 40 strings. Three of the strings – the comparatively thick, tight and short ones – are bowed with a heavy horsehair bow and "stopped" not with the finger-tips but with the nails, cuticles and surrounding flesh (talcum powder is applied to the fingers as a lubricant). The remaining strings are resonance strings or tarabs (see: sympathetic strings), numbering up to around 35, divided into 4 different "choirs". On the lowest level are a diatonic row of 9 tarabs and a chromatic row of 15 tarabs, each encompassing a full octave plus 1–3 extra notes above or below. Between these lower tarabs and the main playing strings lie two more sets of longer tarabs, which pass over a small flat ivory bridge at the top of the instrument. These are tuned to the important tones (swaras) of the raga. A properly tuned sarangi will hum and buzz like a bee-hive, with tones played on any of the main strings eliciting echo-like resonances. A few sarangis use strings manufactured from the intestines of goats - these harken back to the days when rich musicians could afford such strings.

How it looks:

Example of playing:

Sitar

Sitar with all its 22 strings and long neck has one of the richest sounds from all plucked strinf instruments.

Some information from Wikipedia:

The sitar is a plucked stringed instrument predominantly used in Hindustani classical music, where it has been ubiquitous since the Middle Ages. It derives its resonance from sympathetic strings, a long hollow neck and a gourd resonating chamber.

Used throughout the Indian subcontinent, particularly in Northern India, Pakistan, and Bangladesh.

The sitar's curved frets are movable, allowing fine tuning, and raised so that sympathetic strings can run underneath them. A sitar can have 21, 22, or 23 strings, among them six or seven played strings which run over the frets: the Gandhaar-pancham sitar (used by Vilayat Khan and his disciples) has six playable strings, whereas the Kharaj-pancham sitar, used in the Maihar gharana ,to which Pt. Ravi Shankar belongs, has seven. Three of these (or four on a Kharaj-pancham sitar), called the chikaari, simply provide a drone: the rest are used to play the melody, though the first string (baajtaar) is most used.

The instrument has two bridges; the large bridge (badaa goraa) for the playing and drone strings and the small bridge (chota goraa) for the sympathetic strings. Its timbre results from the way the strings interact with the wide, sloping bridge. As a string reverberates its length changes slightly as its edge touches the bridge, promoting the creation of overtones and giving the sound its distinctive tone. The maintenance of this specific tone by shaping the bridge is called jawari. Many musicians rely on instrument makers to adjust this.

Materials used in construction include teak wood or tun wood (Cedrela tuna), which is a variation of mahogany, for the neck and faceplate (tabli), and gourds for the kaddu (the main resonating chamber). The instrument's bridges are made of deer horn, ebony, or very occasionally from camel bone. Synthetic material is now common as well. The sitar may have a secondary resonator, the tumbaa, near the top

How it loooks:

Example of playing:

Bansuri

As flutist i couldn't begin from another instrument. This one has softest sound from all Indian instruments.

Some information from Wikipedia:

The bansuri is a transverse alto flute of the Indian Subcontinent made from a single hollow shaft of bamboo with six or seven finger holes. An ancient musical instrument associated with cowherds and the pastoral tradition, it is intimately linked to the love story of Krishna and Radha, and is depicted in Buddhist paintings from around 100 AD. The Bansuri is revered as Lord Krishna's divine instrument, and is often associated with Krishna's Rasa lila; mythological accounts tell of the tunes of Krishna's flute having a spellbinding and enthralling effect not only on the women of the Braj, but even on the animals of the region. The North Indian bansuri, typically about 14 inches in length, was traditionally used as a soprano instrument primarily for accompaniment in lighter compositions including film music. The bass variety (approximately 30"), pioneered by Pt. Pannalal Ghosh and elevated to heights of global renown by the brilliance of Pt. Hariprasad Chaurasia has now been indispensable in Hindustani Classical music for well over half a century. Bansuris range in size from less than 12" to nearly 40".

There are two varieties of bansuri: transverse, and fipple. The fipple flute is usually played in folk music and is held at the lips like a whistle. Because it enables superior control, variations and embellishments, the transverse variety is preferred in Indian classical music.

Pandit Pannalal Ghosh (1911–1960) elevated the Bansuri from a folk instrument to the stage of serious classical music. He experimented with the length, bore and number of holes, and found that longer length and larger bore allowed for better coverage of the lower octaves. He eventually pioneered longer bansuris with larger bores and a seventh hole placed a quarter turn inwards from the line of the other six finger holes.

How it loooks:

Example of playing:

The week of Indian ethnic

The origins of Indian classical music can be found in the Vedas, which are the oldest scriptures in the Hindu tradition. Indian classical music has also been significantly influenced by, or syncretized with, Indian folk music and Persian music. The Samaveda, one of the four Vedas, describes music at length. The Samaveda was derived from the Rigveda in order that its hymns could be sung as Samagana; this style evolved into jatis and eventually into ragas. Bharat's Natyashastra was the first treatise laying down fundamental principles of dance, music and drama.

Indian classical music is both elaborate and expressive. Like Western classical music, it divides the octave into 12 semitones of which the 7 basic notes are, in ascending tonal order, Sa Re Ga Ma Pa Dha Ni Sa, similar to Western music's Do Re Mi Fa Sol La Ti Do. However, Indian music uses the just intonation tuning, unlike most modern Western classical music, which uses the equal-temperament tuning system.

Indian classical music is monophonic in nature and based around a single melody line, which is played over a fixed drone. The performance is based melodically on particular ragas and rhythmically on talas. Because of the focus on exploring the raga, performances have traditionally been solo endeavors, but duets are gaining in popularity.

Didgeridoo

Finally i can tell you about Australian aborigines' national instrument - didgeridoo. It is a very good instrument for meditative music.

Some information from Wikipedia:

The didgeridoo is a wind instrument developed by Indigenous Australians of northern Australia at least 1,500 years ago and is still in widespread usage today both in Australia and around the world. It is sometimes described as a natural wooden trumpet or "drone pipe". Musicologists classify it as a brass aerophone.

There are no reliable sources stating the didgeridoo's exact age. Archaeological studies of rock art in Northern Australia suggest that the Aboriginal people of the Kakadu region of the Northern Territory have been using the didgeridoo for at least 1,500 years, based on the dating of paintings on cave walls and shelters from this period. A clear rock painting in Ginga Wardelirrhmeng, on the northern edge of the Arnhem Land plateau, from the freshwater period shows a didgeridoo player and two songmen participating in an Ubarr Ceremony.

A modern didgeridoo is usually cylindrical or conical, and can measure anywhere from 1 to 3 m long. Most are around 1.2 m long. The length is directly related to the 1/2 sound wavelength of the keynote. Generally, the longer the instrument, the lower the pitch or key of the instrument.

The vibration is produced by the player's lips.

How it looks:

Example of playing:



P.S. From tomorrow till weekend i will describe Indian ethnic instruments.

Upright bass (Double bass)

To determine this instrument i asked one girl in the jabber to name a random instrument. It's not old enough for me, but i'm happy that she didn't said "guitar" ^_^_^ And this is the first bowed string instrument here.

Some information from Wikipedia:

The double bass, also called the string bass, upright bass, bass violin or contrabass, is the largest and lowest-pitched bowed string instrument in the modern symphony orchestra. The double bass is a standard member of the string section of the symphony orchestra and smaller string ensembles in Western classical music. In addition, it is used in other genres such as jazz, 1950s-style blues and rock and roll, rockabilly/psychobilly, traditional country music, bluegrass and tango.

It is uncertain whether the instrument is a descendant of the viola da gamba or of the violin, but it is traditionally aligned with the violin family. While the double bass is nearly identical in construction to other violin family instruments, it also embodies features found in the older viol family.

Like many other string instruments, the double bass is played either with a bow (arco) or by plucking the strings (pizzicato). In orchestral repertoire and tango music, both arco and pizzicato are employed. In jazz, pizzicato is the norm, except for some solos and also occasional written parts in modern jazz that call for bowing. In most other genres, such as blues and rockabilly, the bass is plucked.

The double bass is a transposing instrument and sounds one octave lower than notated.

How it looks:

Example of playing:

Dombura

At first i wanted to tell about a didgeridoo but then decided to add at least one string instrument ^_^_^ Also i'm glad to say that Week of Indian ethnic coming soon.

Some information from Wikipedia:

The dombura is a long-necked lute popular in Central Asian nations. Some scholars have opinion that the name arises from the Persian tanbur (but there are also many other opinions realted to Turkic lanuage roots of the word and Arabic language roots of the word) and the instrument shares some of its characteristics with the Turkic komuz. The dutar of Turkmenistan is also closely related.

The instrument differs slightly in different regions. The Kazakh dombra has frets and is played by strumming with the hand or plucking each string individually, with an occasional tap on the main surface of the instrument. While the strings are traditionally made of sinew, modern domburas are usually produced using nylon strings.

The Turkestani and Badachstan damburas are fretless with a body and neck carved from a single block of wood, usually mulberry or apricot. The dambura is played with much banging and scratching on the instrument to help give a percussive sound. The two strings are made of nylon (in modern times) or gut. They cross a short bridge to a pin at the other end of the body. There is a tiny sound hole in the back of the instrument, while the top is thick wood. It is not finished with any varnish, filing/sanding of any kind, and as with all other Afghan instruments there is some decoration.

The Dumbura is the equivalent instrument of the Tatars and Bashkirs. A performer strikes all the strings at the same time. The upper string performs the bourdon tone and the lower string performs the melody. A dumbura is used as a solo as well as an ensemble instrument.

How it looks:

Example of playing:

Bagpipes

As i promised, today i will tell about bagpipes.

Some information from Wikipedia:
Bagpipes are a class of musical instrument, aerophones, using enclosed reeds fed from a constant reservoir of air in the form of a bag. Though the Scottish Great Highland Bagpipe and Irish uilleann pipes have the greatest international visibility, bagpipes of many different types come from different regions throughout Europe, Northern Africa, the Persian Gulf, and the Caucasus.

A set of bagpipes minimally consists of an air supply, a bag, a chanter, and usually a drone. Most bagpipes also have additional drones (and sometimes chanters) in various combinations, held in place in stocks—connectors that fasten the various pipes to the bag.

The most common method of supplying air to the bag is by blowing into a blowpipe, or blowstick. In some pipes the player must cover the tip of the blowpipe with his tongue while inhaling, but modern blowpipes have a non-return valve that eliminates this need.

The bag is an airtight reservoir that can hold air and regulate its flow while the player keeps the bag inflated by blowing into it or pumping with a bellows, enabling the player to maintain continuous sound for some time. Materials used for bags vary widely, but the most common are the skins of local animals such as goats, dogs, sheep, and cows. More recently, bags made of synthetic materials.

The chanter is the melody pipe, played by two hands. A chanter can be bored internally so that the inside walls are parallel for its full length, or it can be bored in the shape of a cone. Additionally, the reed can be a single or a double reed.

Most bagpipes have at least one drone. A drone is most commonly a cylindrical tube with a single reed, although drones with double reeds exist. The drone is generally designed in two or more parts, with a sliding joint ("'bridle'") so that the pitch of the drone can be manipulated. Depending on the type of pipes, the drones may lay over the shoulder, across the arm opposite the bag, or may run parallel to the chanter. Some drones have a tuning screw, which effectively alters the length of the drone by opening a hole, allowing the drone to be tuned to two or more distinct pitches. The tuning screw may also shut off the drone altogether.

How it loooks:

Example of playing:

Zhaleika

Well, i don't have enough information about today's instrument - even english wikipedia failed to provide necessary information. That's why i will just tell all i know about this instrument and my opinion about its sounds. Not a good choice for the second article in the blog, but it's just a threshold for Bagpipes article.

Anyway you can look or even edit this article at Wikipedia
(Found later - info. I shouldn't trust wiki so much ^_^_^")

The zhaleika is a slavic ethnical single-reed hornpipe. It is the most popular Russian folk wind instrument. Zhaleika had been mentioned at 18 century for the 1st time, but there is an opinion there was another name earlier. Also this is a traditional instrument of sheepheads and some scientists believe it used at funeral rituals.

It can have 3-5 holes and usually has near one diatonic octave usually. As for sound it's enough loud and harsh.

How it looks:

Example of playing:


You can order it here. Ask me about help if you need.

Recorder

From all instruments i know, this one is my favorite because it has really nice sounds and saved me from a hunger during whole month at this summer ^_^_^

Some info from Wikipedia:

The recorder is a woodwind musical instrument of the family known as fipple flutes or internal duct flutes. It is distinguished from other members of the family by having holes for seven fingers and one for the thumb of the uppermost hand.

The recorder was popular in medieval times through the baroque era, but declined in the 18th century in favour of orchestral woodwind instruments, such as the flute, oboe, and clarinet.

The recorder was revived in the 20th century, partly in the pursuit of historically informed performance of early music, but also because of its suitability as a simple instrument for teaching music and its appeal to amateur players. Today, it is often thought of as a child's instrument, but there are many professional players who demonstrate the instrument's full solo range.

The sound of the recorder is remarkably clear and sweet, partly because of the lack of upper harmonics and predominance of odd harmonics in the sound.

How it looks:



Sample of playing recorder in video:

Beginning

The purpose of this blog is to gather people, who like rare music and musical instruments. I will try to post here a new musical instrument every day, so if you want help me in this let me know about rare instruments you like (or don't like ^_^_^).

In post i will try give description, links to Wikipedia or other sites with full information, photos and links to video or at least audio. maybe approximate prices and sites where you can buy something.

With the information i get i will organize special weeks, which will represent any musical tradition or instrument type.